Address: 3124 Longleaf Ranch Cir, Middleburg, FL 32068, United States

Blog

Top 10 traits of Center Console Boats

Top 10 traits of Center Console Boats

Life is full of compromise, and boats are no exception. However, just like everything else, we do whatever is in our power to achieve perfection as closely as possible. This is where center console boats factor in when looking for a boat that fits your on-water lifestyle. These boats occupy the small-boat market’s main segment because they deliver excellent performance, rough-water stability, and good looks. But not all console boats are equal; hence it’s imperative that you check out these top 10 traits before making a final choice.

  1. Sturdy Construction

Nobody wants a wobbly, flimsy fishing boat, ever. How can you know for sure about the best center console boats? In addition to market research and manufacturer reputation, pay attention to the boat while on a sea trial. Listen for vibrations and rattles that indicated loose fittings, creaks in fiberglass, and feel how stable the boat is when hitting waves at high speed.

  1. Center Console Hull Design

This world works on trade-offs—a deeper V means smoother sailing through the seas, but less V in the stern provides more lateral stability, less draft, and better efficiency. Also, keep in mind the power catamaran options that can run pretty smooth but come with a list of kinks such as snap-rolling, sneezing, or outward leaning in turns.

  1. Weight and size

Size does matter when selecting Center Console Boats– larger is not always better. Bigger boats cost more and are challenging to tow and can get stuck in certain areas. Similarly, there’s a common fixation that lightweight means better, but that represents another trade-off. A lighter boat is faster and efficient, but then again, it will be that much easier for it to launch off waves. Heavier boats are better at navigating through waves and don’t launch as often, which results in smooth sailing in rough areas.

  1. Sea-keeping abilities

Consider this trait by reflecting back on the qualities of the hull design, size, and weight and then adding your ambition level and your skill as a fisherman. Ask yourself if you’re willing to sacrifice some comfort in favor of better performance when it’s calm? Does the boat designs suit your preference of fender hangers or is best suited for quick fenders? Regardless, the bottom line is that safety should be the priority in any situation and should not be compromised on in any way.

  1. Livewell capacity and quality

The matter of livewell capacity is dependent on your personal preference for fishing style. If you feel this is a deciding factor, then focus on:

  • Volume: more is better
  • Shape: rounder is better
  • Interior color: blue keeps the baits calm
  • Water flow: more is better
  • Dedicated pumps are a must.
  • Back-up pumps get bonus points
  • Hatch quality: no leaking or spilling is good.
  1. Style-specific fishing design

The boat design should reflect your fishing style if you have one, so make sure you choose accordingly. There are a million variables that factor in this decision, and it won’t be a complicated one since most people enjoy several fishing styles. So a center console boat can cater to all fishing styles, but make sure to keep in mind what you enjoy the most as you assess the boat’s design.

  1. Rod and tackle stowage

This variable is mostly dependent on where and how you travel. Locking rod boxes are a must-have for trailer-boaters and for boats that get left in a marina. While having an onboard tackle stowage on smaller boats can save you from the hassle of carrying a big tackle-box to and from the boat before every trip.

  1. Drifting Characteristics

You’ll be surprised to know how a boat can drift: faster or slower, stern-to or beam-to, some rock like crazy in a beam sea, and so on. While doing a sea trial, always put the boat in neutral and let the boat drift so you can see how it will act. But remember that boats with taller gunwales, less weight, and flatter bottoms will drift faster than others.

  1. Fuel capacity

This is a primary concern for anglers who make long cruises, but the adage holds true: one-third fuel for the trip there, one-third to return, and have one-third for reserve.

  1. Comfort

Although this is probably the least concern of a hard-core angler, it does deserve a place on the list. Comfort will dictate when you’re done with your sail head for home. Hence a small dose of comfort can delay the return by an hour, so it’s something to think about while choosing a center console boat.

We understand that you’ll put a lot of effort and thought into this decision. But, while looking for the best center console boat, make sure you do an extended sea trial before investing. Do everything, trial under different conditions, go fast and go slow, drift, and sleep on it before finalization. Happy sailing!

The Pros & Cons of Choosing a Center Console Boat

The Pros & Cons of Choosing a Center Console Boat

Center console boats, best center console boats, rod holders for boat

You need to gain a comprehensive overview of the landscape,   whenever you try to enter into uncharted territory. Boating may not be a lifestyle suitable for everyone. However, the select few who do decide to indulge themselves in some quality time at sea, it becomes important for them to understand a few elements. With an array of boats available for sale, evaluating their specifications through certain criterions becomes necessary. Whether you need to choose a center console boat or a dual console boat, at the end of it all, the boat should meet your requirements.

Given the nature of the experience, people buy boats for different reasons. Be it for recreational purposes, be it for entertaining family and friends, or be it for learning the skill of fishing. Boating is a truly fulfilling experience and brings a great deal of sense of accomplishment. Hence, to make a decision regarding your boat, follow through to understand what floats your boat.

What Are Center Console Boats?

A center console boat brings forth a variety of usages for different people and occupies a considerable segment of the small-boat market. Entailing superior performance, sea-going lifespan and utility power, a center console boat is essentially an open hull single-decked boat where the helm is in the center. Certain models entail cabins, which are typically located in the bow for holding small berths for resting.

The Pros of a Center Console Boat

Being aesthetically appealing and delivering rough-water ability, a center console boat provides you with more room for amenities, such as a mini-galley or bunks. Optimized to get the job done, the boat comprises a flat floor and opens up the view of the boat to a 360-degrees. Therefore, not constricting your movement to any one particular side. Suitable for high-speed water sports, it provides open access in all directions. It is the perfect boat for serious men and women looking to get into fishing, as is supportive for fishing or general-purpose towing,

This boat offers excellent spec versatility, as it channels fuel efficiency and encourages minimal transom dead rise harnessing a single-engine. With the best center console boats offering accessibility and visibility, you get to pull into a busy dock and maneuver around tight spots with relative ease. Requiring no additional crew for docking, you can independently operate a center console boat. Owing to most models entailing no special accommodation and cabins, this boat doesn’t allow valuable space to be wasted.

You get to catch onto a reluctant fish without having trouble moving around your boat, as this boat makes the process of fishing hassle-free and obstruction-free. Taking on deep-sea waves without any problem, their V-shaped hull paired with a customizable single-engine design allows to you benefit from maximum efficiency.

The Cons of a Center Console Boat

On the opposing end of the spectrum, there are several elements that don’t work in the favor of a center console boat. Offering limited seating capacity and no weather protection, they spoil the experience of being out at sea. With no seating available, you don’t get to take your friends or family along for an expedition. And while you’re out at sea, you expose yourself to harsh weather conditions, resulting in sunburns. Additionally, due to not being designed with the best hull forms, a center console boat can’t compare with other water sport boats.

Buying Specialized Products from Quick Boat Fender

Most center console boats comprise a length of 18 feet to 40 feet, making them perfect for using our boat fender hangers. With the boat’s design making docking easy, our boat fender hanger protects your boat from bumping into other boats or into the dock. Easily adjustable into rod holders for boats or into the empty space of a rod holder, our boat fender hanger offers a high level of functionality.

Our hanger anchors itself onto your boat’s rod holder, which is one of the toughest components of your boat. Designed with a unique curved design, our hanger takes the fender line to the edge of the boat, making the line not rub against the gel-coat. Rather than allowing your prized investment to bear the brunt of others or your faults, it is important to make use of accessories that make the boating experience trouble-free. By tagging onto your boat in a simple manner, our boat fender hanger offers a 10-year replacement guarantee.

An Overview: The Use of Rod Holders for Boats

An Overview: The Use of Rod Holders for Boats

Within any given activity, there are a set of tools and practices that need to be employed. Fishing, for a lot of people, counts as a relaxing and peaceful hobby. Being an essential tool when fishing, rod holders play an instrumental role for fishers. Designed and manufactured in a variety of designs, each rod holder fits a different purpose. Enabling a hands-free approach while fishing, a rod holder enables a comfortable fishing experience. As it allows you to sit back and relax, rather than holding the fishing rod for the whole time.

Depending upon whether you’re fishing from land or from a boat, you can pick and choose a rod holder fitting the framework of your criteria. The foremost purpose of rod holders is to enable the angler to not hold onto their fishing rods while fishing and to store their rods while travelling on the sea. Allowing you to focus on hooking the bait and navigating the boat, the rod holder tends to the back-breaking task. With the most popular and best rod holders being the angled single holder, these rods are screwed into the transom and gunwales of the boat during the course of the manufacturing process.

The Different Types of Best Rod Holders

Available in an array of different materials, rod holders are manufactured with ABS plastic, fiberglass, nylon, aluminum, stainless steel and chrome-plated zinc. With each sailor having a different purpose, choosing specific materials becomes paramount. Fiberglass and nylon do not corrode, however, aren’t as sturdy and durable as other treated metal. Chrome-plated brass and stainless steel rod holders, on the other hand, are perfect for rough waters. Being rigid enough, they can withstand the choppy and rough conditions at sea. For individuals seeking a more budget-conscious option, plastic and fiberglass rods are a good option for calmer water, as they’re suitable for bearing the brunt of less violent sea conditions.

Make your fishing experience successful and easy by choosing the right style of a rod holder.

  • Clamp-On Mounts

Being of the most versatile and reliable rod holder, this tool can get permanently installed into your mount. Allowing you to clamp it on wherever you need and in whatever position, this rod can easily adjust itself for different fishing types, be it side pulling or trolling. Hence, whether you wish to position them on the bow pulpit, stern pushpit or the radar arch, you have the liberty to utilize them in your own manner.

  • Deck On Mounts

This rod requires only a few holes for drilling and is perhaps the most convenient rod holder. Proving itself to be a piece of equipment that eliminates on-deck obstruction, it can easily be removed when required. It also enables you to keep a cleaner deck, while reducing any hassles you may face while fishing.

  • Flush Swivel

Such a fishing rod holder is most suitable for situating into an existing holder, as it allows the rod to be at least a 30-degree angle or be vertical. With the rod holder standing still, this is one of the best selections to choose when you’re out at sea for a big catch.

Why Choose Quick Boat Fender?

While choosing an appropriate rod holder is vital, it is equally important to protect and fend for your boat with boat fenders. Sliding into your rod holder or into your rod holder’s empty space, our boat fender hanger shields your boat from the damages it is exposed to while docking or while being docked. Using one of the sturdiest and toughest components on your boat, which is your rod holder, our boat fender hanger anchors itself. Being ideal and adjustable for any boat of up to 40 feet, our fender hanger adjusts to your boat through a simple knot, which stays hidden in the tube.

We understand how expensive boats are and are familiar with how expensive their maintenance and repairing is. Hence, our boat fender hangers don’t allow your prized possession to bear any damages. Hanging over the side of your boat, be it one of the best center console boats, our hanger allows a boat fender to absorb shock emitting from vessels bumping into each other or the docks. Requiring no special alternation or addition, these boat fender hangers are an easy and convenient accessory to add to your boat. Our distinctive patented design curves over the side of the boat, keeping the fender line from affecting the gel-coat or paint on your boat.

We offer functionality paired with aesthetically pleasing boat fender hanger – our products don’t entail any fender lines hanging about or cheap designs that spoil the appeal of your boat. With such attention to detail and possessing the capacity to bear hundreds of pounds of pressure, our boat fender hanger makes the process of docking a hassle-free one.

 

A Guide: How to Dock a Boat

A Guide: How to Dock a Boat

With novices merely steering their course onto boating, the process of docking can be intimidating and stressful. Having just bought yourself your dream boat, you probably don’t want your investment to bear any damage or cause any damage. The trick of mastering docking might include understanding few elements. However, it is a trick that can be perfected with time and experience.

Rather than allowing your nerves to get the better of you, it is important to take things slow and steady. If you’re unsure of anything, don’t be afraid of pulling back, circling around for trying again or for stopping altogether. Whether you’re sailing one of the best center console boats or one of the best deck boats, it is important to place your fenders well in advance. And is equally important to have your docking lines ready to tie off as you start approaching the dock. With a variety of factors affecting your docking abilities, such as environmental conditions or some other unforeseen conditions, you can end up making mistakes. Hence, follow through on the guide to understand and master the method of docking your boat safely.

  • It might seem like a useless tip. However, more often than not, individuals tend to make the mistake of ramming their boats onto the docks, merely due to approaching the dock at a high speed. As a consequence, it is imperative for you to approach the docks while cruising the boat at a slow speed.
  • While it might seem counter intuitive to the preceding point, approaching the docks at an insufficient speed can also prove to be disastrous. The appropriate speed glides you over to the docks, by countering and overcoming current, wind and momentum. Without the appropriate speed, one of these elements can take over.
  • It is equally important to steer your boat correctly. With a boat steering from the rear and pivoting on its axis, this means turning the wheel to the left leads the back of the boat to move to the right. Moreover, if you have a single-engine boat, it is necessary to remember that turning the wheel before applying any power is important.
  • It is unwise to kill the engines without securing all the lines. With less experience in docking, you can easily make the mistake of shutting down your engine as soon as your boat is in the slip. However, you never know when an unfortunate event may occur. Owing to this reason, it is essential to keep the engines on, as this allows you to steer your boat away when necessary.
  • If the wind conditions are in your favor, then let them assist you. In such a scenario, you’re likely to come at a shallow angle. With you a yard or two away from docking into place, get in a parallel position to it. This shall help the wind blow you in smoothly.
  • If the wind conditions are against you, you need to bring yourself into a steeper angle. Positioning yourself in such an angle will give you the momentum to carry yourself close to your docking place. In such a scenario, it is important for you to be ready with your dock lines, as wind can knock you off your position.
  • As mentioned earlier, it is important to have a sense of matters. If you feel things aren’t mapping out as planned, then it’s better to abort the docking. Thus, rather than forcing the approach, circle back for trying again.

Choosing the Best Boat Fender Accessories

Any given boating expedition requires appropriate accessories. Quick Boat Fender produces boat fender hangers that anchor onto your rod holder. Being easily adjustable and not requiring any special alterations to your boat, our boat fender hanger is suitable for any boat of up to 40 feet. Hanging your fender over the side of your boat, our hanger makes the process of docking easier. Essentially protecting your boat from bumping into the dock or other boats, our boat docking supplies work to make the process of docking a pleasant one. By locking into place, our boat fender hanger shields your prized possession from harm’s way. With it being hard to find a place for tying your boat fenders, our hanger effortlessly slips into your rod holder’s empty space or into your rod holder.

What Are Boat Fenders?

What Are Boat Fenders?

Any significant investment comes with its own conditions. Buying a boat comes with its own set of challenges, as protecting it and extending its longevity is important for securing your investment. Yet, for novice sailors, understanding the range of accessories, tools and techniques available for protecting their boat from harm’s way can be difficult. With each boating accessory playing a specific role, a boat fender works to shield your boat from bumping into other boats or into the docks.

It is understandable that leaving your boat docked on the docks may leave you feeling agitated. However, having the appropriate accessories on board can give you peace of mind. Acting as a cushion, fenders are available in a variety of sizes and shapes for vessels with differing weights and lengths. Most commonly they are made out of marine-grade vinyl & PVC, and act as the first-line of defense for a boat. Being the most popular type of fender for recreational boats, a double-eye cylinder can either be mounted horizontally or vertically through using ropes.

What Type of Fender to Choose?

Absorbing the shock resultant from boats bumping into each other, it is important to choose a fender that has built-in UV protection as this protects your fender from deteriorating or getting discolored. Also, it is important to choose a marine-grade vinyl fender, as it doesn’t scratch off the gel coat on the boat’s surface. Certain fenders also have an anti-microbial agent in them, thus stopping the breeding of bacteria that causes material to degenerate.

The defining conditions that need to be assessed while choosing a fender include the boat’s length, mooring conditions and the weight of the boat. In typical scenarios, it is recommended for there to be one fender for every ten feet of waterline paired with at least three fenders on each side of the vessel. In case, your boat is heavier than the normal limit for its length, or if the mooring conditioners are harsher, then it is advisable to make use of more fenders. With a variety of styles and types available, you get to choose which sort of boat fender you prefer:

  • Two Eye Cylindrical Fenders

These fenders have a molded-in fair lead or else a tab at each end. You have the choice to hang them vertically or horizontally. Hence, you can tie them on one end or tie both ends according to your preference.

  • Round Fenders

These fenders are most popular for large powerboats entailing concave bows. Being especially suitable for commercial fishing boats, these round fenders can also be used as a low-tech mooring buoy.

  • Rafting Cushion

These fenders are specifically designed for providing maximum protection when rafting.Made out of durable marine-grade vinyl, these fenders entail six molded tubes providing resistance and are capable of hanging either vertically or horizontally.

  • Transom Mounted Fenders

These fenders are designed for protecting a boat’s transom while docking in a marina. Fitting the edge of swim platforms and adequately gripping the fendering location, it is the perfect accessory for protecting specialized areas of a vessel.

  • Pontoon Fenders

Available and designed in specialized shapes, a pontoon fender protects the fragile aluminum fencing paired with the uncommon corners on pontoon boats.

With the boating and fishing experience being about enjoying yourself, there are different accessories that you can add along with your fender, for extending its lifespan. Be it fender racks, fender covers, fender suspenders or hand-operated fender pumps, you can choose to protect the singular accessory protecting your boat. Inclusive of some of the best boat fender accessories is a boat fender hanger.

Choosing Quick Boat Fender for Finding Quick Boat Supplies

We are familiar with how boat fenders are critical for protecting your boat. As a result, we equip you with adjustable boat fender hangers that slide into your rod holder or can slide into the rod holder’s empty space. Be it center console boats, fishing boats or cuddy cabins boats, our boat fender hanger protects your boat from bumping into other boats or into the docks. Adding functionality to your boat, our fish head designed hanger can bear significant pressure and is suitable for boats up to 40 feet. Our hangers make your sailing experience convenient and require no special modification to your boat.

Your basic guide to selecting the right boat fenders

Your Basic Guide to Selecting the Right Boat Fenders

Fenders are one of the most important quick boat supplies, acting as a cushion between a dock (wood, metal, or concrete) and a boat, or another boat while preventing damage to the topsides of your boat.

How do fenders work?

Whether soft or inflated foam, flat, spherical, or cylindrical – fenders absorb the vessels’ shock when they bump into docks or other vessels. They not just insulate the boat from damage but also decelerate it as it surges and rolls about. Usually, boats tying up to floating docks set fenders a bit above the waterline to maintain a buffer zone between boat and dock. There is a challenge in docking next to pilings; the pilings can push the fenders aside, leading to severe consequences. However, this may be resolved by using a fender board that spans the distance between pilings. With the board and fenders, a boat may ride reasonably conveniently against a wharf.

Boats having permanent slips usually customize their space, installing cushions, dock wheels, dock guards, so that the dock does not carry the boat, but the protection only. Since these forms of padding may be placed right at the contact point, they won’t swing out of the way. When fenders are not lined up accurately, dock cushions may prevent damage. There are a plethora of padding configurations that you can use to defend any boat from docking damage – make sure they are creative.

What is the size of your Boat?

Roughly, we like 1” diameter for cylindrical fenders or 2” diameter for spherical fenders for every 4-5 feet of boat length. However, this recommendation isn’t firm because the size of the fender also depends on conditions, the weight of the boat, and location. Boats, in unsafe end ties on San Francisco, Lake Erie, or other locations with horrible tidal surge may need more protection than a vessel docked in a peaceful lake. We recommend using fender whips or proper lines to suspend the fenders at the right height.

Also, we advise you to use large diameter fenders since they offer the best protection. After all, the width of the fender is the only thing that separates the boat from the dock.

Do you want to hang them Vertically or Horizontally?

Big B fenders or center rope tube fenders enable you to hang the fender either vertically or horizontally using one line running through the center line. Two figure-eight at both ends of the fender or a figure-eight knot at the end of the line is used to keep the fender from sliding.

Flat fenders are either articulating or vinyl covered or modular. To produce a custom-fitted system, string together the modular style. The flat, vinyl-covered, hinged fenders vertically wrap around small boat gunwales and are brilliant for boats with tumble home.

What Style do you Prefer?

Some common styles that you may choose are:

  • Lee free board fenders
  • Pontoon fenders
  • Rafting cushions
  • Round fenders
  • Transom mounted fenders
  • Tuff end fenders
  • Two cylindrical eye fenders
  • V-shaped freedom fenders

Are you looking for a boat dock fender holder or other boat fender accessories? Give Quick Boat Finder a call; we’ve got you covered!  

What do you Need to be Aware of Regarding Boat Dock Bumpers?

What do you Need to be Aware of Regarding Boat Dock Bumpers?

Boat dock bumpers are one of the most important boat docking supplies and must not be ignored. They are an investment that will enable you to cast off with confidence, save your boat from damage, and extend the lifespan of your dock.

What are the Dock Bumpers?

A dock fender or dock bumper is a device that can absorb shock and can be attached to your dock. Whether the damage is caused by inclement weather jostling a vessel at anchor or by cruising into the dock too quickly, bumpers help to protect boats. While this guide concentrates on their marine application, dock bumpers may also be used to safeguard loading docks from the tractor-trailer, accidental impacts.

What are Dock Bumpers Important?

Whether you’re a seasoned sailor or a beginner boater, everyone hits the dock at a single point or another. By preparing for the inevitable, you’ll avoid embarrassing yourself at a busy marina, or worse, having to pay for expensive boat repairs.

The repair cost is dependent on the vessel, but a gash or hole in a fiberglass boat may cost anywhere from $100 to $400, with larger repairs easily costing over a thousand dollars. In order to prevent this type of damage, boat dock bumpers are perceived as affordable by many. They are available in a variety of materials and sizes, allowing you to create a tailored solution that works best for the location of your dock and your boat.

Duck Bumper Materials

The outer protective layer of a bumper may be made out of PVC, vinyl, foam, or rubber. Based on your needs, specific material may work better for you than others – here are their pros and cons:

  • Foam: This is one of the least expensive dock bumper options and may not fare well as other materials over time. While it may succeed in protecting your dock and boat, it may discolor or chip over time.
  • Rubber: Recycled rubber tires are inexpensive, UV resistant, low friction, and may absorb high impacts. If you have a fiberglass boat, be careful – rubber will scuff the hull.
  • PVC: PVC is designed to withstand ice, UV rays, sea salt, or any other climate.
  • Vinyl: Vinyl can last for many years and will not discolor. It is also designed to withstand variable climates.

Selecting the Right Dock Bumpers

You don’t want to waste money on excess bumpers you don’t want, but you also want to ensure your boat is protected. So, where should you place them, and what type should you purchase?

  • First, take into consideration the potential impact points. You have three points of contact to think about if you have a boat slip. The area where your boat may collide with the slip head-on should be covered with additional cushioning.
  • Also, you should determine the size of your boat and the potential impact it may have on the dock. You could use corner bumpers or foam dock siding if you have a small motorboat. If you have a large vessel, you may want to consider a more heavy-duty piling bumper protection or PVC dock siding.
  • Lastly, you’ll want to protect the pilings and corners of your dock. You can use mountable dock wheels or corner bumpers for corners to ensure a safe docking experience. If your dock has pilings, feel free to mount traditional dock bumpers vertically to protect them.

If you’re looking for quick boat supplies for your center console boats, let Quick Boat Fender know. Our team will do everything in its capacity to get you the supplies you’ve requested for.

Should you spend your money on boat fender holders?

Should you Spend your Money on Boat Fender Holders?

While boat fender holders may not seem to be mandatory, we’re all aware of the countless instances that a boat has a limited amount of space to hold things like tackle, snack and beverage coolers, and comfortable coolers and cushions. Your boat also does not have the space to hold another set of vital, but spacious items like your boat fenders. You can’t ignore the fact that you need to include a certain number of fenders on your boat.

However, they’re round, big, and roll around a lot. In addition, ropes are also attached to them, which tend to trip whoever is attempting to step over them. You can have them stowed away exactly where you need them instead of looking like an absolute neophyte by dragging them in the water along the boat’s side.

Do you need a Boat Fender Holder?

Although boat bumper holders may feel like a luxury to some, you’ll see that these simple racks are quite worth the cost after you’ve tripped a few dozen times over a runaway fender. They hold your boat fenders exactly on the rail, right where you need them. Since it is easy to remove the fenders, you’ll be ready for rafting up or docking in a blink. Since they are attractive stainless steel, they do an excellent job of blending with your bright work. Now, considering just how much you spend per year on a boat, the cost isn’t really all that high.

Choices for your Style and Boat

A decent commercial boat fender holder may be attached to most standard size railings, and when they’re not in use, they generally fold flat. That makes for fewer bruised shins and easy mounting. When you’re in a small boat, the folding feature is an important component. Generally, they are available in double or triple configurations, so you may stow each of your spares too. Typically, the fender holders are composed of stainless steel, so they’ll require little maintenance while also looking good.

If you’re in search of online boat fenders for sale, hit us up. Quick Boat Fender will ensure that your needs are promptly taken care of.

Powered by Top Rated Local®